Products
RLM Series Refuse Truck
Refuse Collection Vehicles / Rear Loaders
Pac-Mac
The Pac-Mac® RLM Series is designed for municipalities and contractors seeking a balance between capacity and maneuverability. Available in 11 and 13 cubic yard models, these rear loaders offer a compaction rate of 800–900 lbs/yd³, ensuring efficient waste collection in various environments.
Features
One-piece flat floor
Curved shell body
Fast cycle time
Meets or exceeds ANSI standards
Wide-open accessibility for cleaning and maintenance
Automatic latches and integrated tailgate props
High standard for hydraulic cleanliness
LED lighting with weatherproof connections and braided loom
Dual amber oval rear strobes
Heat-treated pins and replaceable bushings throughout
Large access door with safety interlock
Emergency stop on curb side
Driver alert buttons on both sides
Sectional valves
RLM11
Specifications
Capacity: 11 yd³
Hopper Capacity: 2.6 yd³
Body Weight (shell only): 3,187 lbs
Body Weight (complete unit): 10,320 lbs
Hopper Inside Width: 80 in
Body Construction
Sidewalls (curved shell): 11 ga. high tensile steel
Flat floor (single sheet): 3/16" high tensile steel
Roof (curved shell): 11 ga. high tensile steel
Ejection panel face: 11 ga. high tensile steel
Hopper: 1/4" 100 ksi T-1
Packer panel face: 3/16" 100,000 PSI (T-1)
Slide panel face: 3/16" high tensile steel
Hopper sides:
Lower tailgate: 3/16" T-1 steel
Upper tailgate: 10 ga. high tensile steel
Hydraulic System
Cylinders:
Ejector: (1) multi-stage, 5.5" bore
Tailgate: (2) 3" bore, 1.75" rod, 30.5" stroke
Slide: (2) 4.5" bore, 3.5" rod, 27" stroke
Packer: (2) 4.5" bore, 3.5" rod, 27" stroke
Valves:
Shutoff: Ball
Packing controls: Sectional spool
Ejector/Tailgate raise: Sectional spool
Operating Pressure: 2,200 PSI (max 2,400 PSI)
Hydraulic Flow: 35–38 GPM
Reservoir: 50 gal
Performance
Packing cycle: 17–19 sec
Reload time: 3 sec
Compaction rate: 800–900 lbs/yd³
RLM13
Specifications
Capacity: 13 yd³
Hopper Capacity: 2.6 yd³
Body Weight (shell only): 3,396 lbs
Body Weight (complete unit): 10,530 lbs
Hopper Inside Width: 80 in
Body Construction
Sidewalls (curved shell): 11 ga. high tensile steel
Flat floor (single sheet): 3/16" high tensile steel
Roof (curved shell): 11 ga. high tensile steel
Ejector panel face: 11 ga. high tensile steel
Hopper: 3/16" 100 ksi T-1 (optional 1/4" T-1)
Packer panel face: 3/16" 100,000 PSI (T-1)
Slide panel face: 3/16" high tensile steel
Hopper sides:
Lower tailgate: 3/16" T-1 steel
Upper tailgate: 10 ga. high tensile steel
Hydraulic System
Cylinders:
Ejector: (1) multi-stage, 5.5" bore
Tailgate: (2) 3" bore, 1.75" rod, 30.5" stroke
Slide: (2) 4.5" bore, 3.5" rod, 27" stroke
Packer: (2) 4.5" bore, 3.5" rod, 27" strokeValves:
Shutoff: Ball
Packing controls: Sectional spool
Ejector/Tailgate raise: Sectional spoolOperating Pressure: 2,200 PSI (max 2,400 PSI)
Hydraulic Flow: 35–38 GPM
Reservoir: 50 gal
Performance
Packing cycle: 17–19 sec
Reload time: 3 sec
Compaction rate: 800–900 lbs/yd³
Options
Single or dual cart tippers
Reeving system with 15K cylinder
Kick bar and container latches (38” minimum chassis height)
Front-mounted pump
Amber or clear beacon rear strobes (single or dual)
Amber oval flush mount strobes (front and/or rear)
Smart light strobe system (can be combined with amber ovals)
Rear vision camera
Work lights over hopper and tailgate sides
Frame-mounted water cooler
Frame-mounted tool box
Tool holder
Emergency stop on street side
Pressure gauge
Limb guard
Options
Single or dual cart tippers
Reeving system with 15K cylinder
Kick bar and container latches (38” minimum chassis height)
Front-mounted pump
Amber or clear beacon rear strobes (single or dual)
Amber oval flush mount strobes (front and/or rear)
Smart light strobe system (can be combined with amber ovals)
Rear vision camera
Work lights over hopper and tailgate sides
Frame-mounted water cooler
Frame-mounted tool box
Tool holder
Emergency stop on street side
Pressure gauge
Limb guard
Options
Single or dual cart tippers
Reeving system with 15K cylinder
Kick bar and container latches (38” minimum chassis height)
Front-mounted pump
Amber or clear beacon rear strobes (single or dual)
Amber oval flush mount strobes (front and/or rear)
Smart light strobe system (can be combined with amber ovals)
Rear vision camera
Work lights over hopper and tailgate sides
Frame-mounted water cooler
Frame-mounted tool box
Tool holder
Emergency stop on street side
Pressure gauge
Limb guard
Options
Single or dual cart tippers
Reeving system with 15K cylinder
Kick bar and container latches (38” minimum chassis height)
Front-mounted pump
Amber or clear beacon rear strobes (single or dual)
Amber oval flush mount strobes (front and/or rear)
Smart light strobe system (can be combined with amber ovals)
Rear vision camera
Work lights over hopper and tailgate sides
Frame-mounted water cooler
Frame-mounted tool box
Tool holder
Emergency stop on street side
Pressure gauge
Limb guard
Options
Single or dual cart tippers
Reeving system with 15K cylinder
Kick bar and container latches (38” minimum chassis height)
Front-mounted pump
Amber or clear beacon rear strobes (single or dual)
Amber oval flush mount strobes (front and/or rear)
Smart light strobe system (can be combined with amber ovals)
Rear vision camera
Work lights over hopper and tailgate sides
Frame-mounted water cooler
Frame-mounted tool box
Tool holder
Emergency stop on street side
Pressure gauge
Limb guard
Options
Single or dual cart tippers
Reeving system with 15K cylinder
Kick bar and container latches (38” minimum chassis height)
Front-mounted pump
Amber or clear beacon rear strobes (single or dual)
Amber oval flush mount strobes (front and/or rear)
Smart light strobe system (can be combined with amber ovals)
Rear vision camera
Work lights over hopper and tailgate sides
Frame-mounted water cooler
Frame-mounted tool box
Tool holder
Emergency stop on street side
Pressure gauge
Limb guard
Video
In-Stock Today!
##
In Stock
Item Title
Brand