Products
RL Series Refuse Trucks
Refuse Collection Vehicles / Rear Loaders
Pac-Mac
The Pac-Mac® RL Series is a versatile rear loader designed specifically for tight urban streets, alleys, parks, and other hard-to-access areas. Available in 6, 8, and 10 cubic yard capacities, this compact refuse truck delivers reliable performance with a compaction rate of 700–800 lbs per cubic yard. Built for strength and maneuverability, it’s ideal for fleets needing a non-CDL option for light-duty waste collection.
Features
Compact Design: Ideal for narrow streets and tight spaces, enhancing maneuverability in urban settings.
High-Strength Construction: Built with 10-gauge high-tensile steel sidewalls and 3/16-inch T1 steel in critical areas for durability.
Efficient Compaction: Delivers a compaction rate of 700–800 lbs/yd³, optimizing payload capacity.
Quick Cycle Times: Complete packing cycle in 15–17 seconds and reload in just 3 seconds, improving route efficiency.
User-Friendly Controls: Simple controls with optional curbside emergency stop enhance operator safety and convenience.
LED Lighting: Equipped with LED lighting and weatherproof connections for improved visibility and reduced maintenance.
Optional Features: Includes options like single cart tipper, rearview camera system, work lights, and dual amber oval rear strobes.
RL6
Specs
Capacity: 6 yd³
Hopper Capacity: 1 yd³
Body Weight (shell only): 2,537 lbs
Body Weight (complete unit): 7,235 lbs
Hopper Inside Width: 66.3 in
Body Construction
Sidewalls (curved shell): 10 ga. high tensile steel
Flat floor (single sheet): 7 ga. high tensile steel
Roof (curved shell): 10 ga. high tensile steel
Ejector panel face: 10 ga. high tensile steel
Hopper: 3/16" 100 ksi T-1 (optional 1/4" T-1)
Packer panel face: 3/16" T-1 steel
Slide panel face: 3/16" high tensile steel
Hopper sides: 3/16" T-1 (lower tailgate), 10 ga. high tensile (upper tailgate)
Hydraulic System
Ejector: Single-stage, 4.5" bore
Tailgate: (2) 3.5" bore, 2" rod, 20" stroke
Slide: (2) 3.5" bore, 2" rod, 19" stroke
Packer: (2) 3.5" bore, 2" rod, 19" stroke
Valves: Ball shutoff, sectional spool for controls
Operating Pressure: 2,400 PSI (max 2,700 PSI)
Hydraulic Flow: 21 GPM
Reservoir: 30 gal
Performance
Packing Cycle: 15–17 sec
Reload Time: 3 sec
Compaction Rate: 700–800 lbs/yd³
RL8
Specifications
Capacity: 8 yd³
Hopper Capacity: 1 yd³
Body Weight (shell only): 2,917 lbs
Body Weight (complete unit): 7,680 lbs
Hopper Inside Width: 66.3 in
Body Construction
Sidewalls (curved shell): 10 ga. high tensile steel
Flat floor (single sheet): 7 ga. high tensile steel
Roof (curved shell): 10 ga. high tensile steel
Ejector panel face: 10 ga. high tensile steel
Hopper: 3/16" 100 ksi T-1 (optional 1/4" T-1)
Packer panel face: 3/16" T-1 steel
Slide panel face: 3/16" high tensile steel
Hopper sides: 3/16" T-1 (lower tailgate), 10 ga. high tensile (upper tailgate)
Hydraulic System
Ejector: 2-stage, 4.5" bore
Tailgate: (2) 3.5" bore, 2" rod, 20" stroke
Slide: (2) 3.5" bore, 2" rod, 19" stroke
Packer: (2) 3.5" bore, 2" rod, 19" stroke
Valves: Ball shutoff, sectional spool for controls
Operating Pressure: 2,400 PSI (max 2,700 PSI)
Hydraulic Flow: 21 GPM
Reservoir: 30 gal
Performance
Packing Cycle: 15–17 sec
Reload Time: 3 sec
Compaction Rate: 700–800 lbs/yd³
RL10
Specifications
Capacity: 10 yd³
Hopper Capacity: 1 yd³
Body Weight (shell only): 3,391 lbs
Body Weight (complete unit): 8,120 lbs
Hopper Inside Width: 66.3 in
Body Construction
Sidewalls (curved shell): 10 ga. high tensile steel
Flat floor (single sheet): 7 ga. high tensile steel
Roof (curved shell): 10 ga. high tensile steel
Ejector panel face: 10 ga. high tensile steel
Hopper: 3/16" 100 ksi T-1 (optional 1/4" T-1)
Packer panel face: 3/16" T-1 steel
Slide panel face: 3/16" high tensile steel
Hopper sides: 3/16" T-1 (lower tailgate), 10 ga. high tensile (upper tailgate)
Hydraulic System
Ejector: Single-stage, 4.5" bore
Tailgate: (2) 3.5" bore, 2" rod, 20" stroke
Slide: (2) 3.5" bore, 2" rod, 19" stroke
Packer: (2) 3.5" bore, 2" rod, 19" stroke
Valves: Ball shutoff, sectional spool for controls
Operating Pressure: 2,400 PSI (max 2,700 PSI)
Hydraulic Flow: 21 GPM
Reservoir: 30 gal
Performance
Packing Cycle: 15–17 sec
Reload Time: 3 sec
Compaction Rate: 700–800 lbs/yd³
RL10
Specifications
Capacity: 10 yd³
Hopper Capacity: 1 yd³
Body Weight (shell only): 3,391 lbs
Body Weight (complete unit): 8,120 lbs
Hopper Inside Width: 66.3 in
Body Construction
Sidewalls (curved shell): 10 ga. high tensile steel
Flat floor (single sheet): 7 ga. high tensile steel
Roof (curved shell): 10 ga. high tensile steel
Ejector panel face: 10 ga. high tensile steel
Hopper: 3/16" 100 ksi T-1 (optional 1/4" T-1)
Packer panel face: 3/16" T-1 steel
Slide panel face: 3/16" high tensile steel
Hopper sides: 3/16" T-1 (lower tailgate), 10 ga. high tensile (upper tailgate)
Hydraulic System
Ejector: Single-stage, 4.5" bore
Tailgate: (2) 3.5" bore, 2" rod, 20" stroke
Slide: (2) 3.5" bore, 2" rod, 19" stroke
Packer: (2) 3.5" bore, 2" rod, 19" stroke
Valves: Ball shutoff, sectional spool for controls
Operating Pressure: 2,400 PSI (max 2,700 PSI)
Hydraulic Flow: 21 GPM
Reservoir: 30 gal
Performance
Packing Cycle: 15–17 sec
Reload Time: 3 sec
Compaction Rate: 700–800 lbs/yd³
RL10
Specifications
Capacity: 10 yd³
Hopper Capacity: 1 yd³
Body Weight (shell only): 3,391 lbs
Body Weight (complete unit): 8,120 lbs
Hopper Inside Width: 66.3 in
Body Construction
Sidewalls (curved shell): 10 ga. high tensile steel
Flat floor (single sheet): 7 ga. high tensile steel
Roof (curved shell): 10 ga. high tensile steel
Ejector panel face: 10 ga. high tensile steel
Hopper: 3/16" 100 ksi T-1 (optional 1/4" T-1)
Packer panel face: 3/16" T-1 steel
Slide panel face: 3/16" high tensile steel
Hopper sides: 3/16" T-1 (lower tailgate), 10 ga. high tensile (upper tailgate)
Hydraulic System
Ejector: Single-stage, 4.5" bore
Tailgate: (2) 3.5" bore, 2" rod, 20" stroke
Slide: (2) 3.5" bore, 2" rod, 19" stroke
Packer: (2) 3.5" bore, 2" rod, 19" stroke
Valves: Ball shutoff, sectional spool for controls
Operating Pressure: 2,400 PSI (max 2,700 PSI)
Hydraulic Flow: 21 GPM
Reservoir: 30 gal
Performance
Packing Cycle: 15–17 sec
Reload Time: 3 sec
Compaction Rate: 700–800 lbs/yd³
RL10
Specifications
Capacity: 10 yd³
Hopper Capacity: 1 yd³
Body Weight (shell only): 3,391 lbs
Body Weight (complete unit): 8,120 lbs
Hopper Inside Width: 66.3 in
Body Construction
Sidewalls (curved shell): 10 ga. high tensile steel
Flat floor (single sheet): 7 ga. high tensile steel
Roof (curved shell): 10 ga. high tensile steel
Ejector panel face: 10 ga. high tensile steel
Hopper: 3/16" 100 ksi T-1 (optional 1/4" T-1)
Packer panel face: 3/16" T-1 steel
Slide panel face: 3/16" high tensile steel
Hopper sides: 3/16" T-1 (lower tailgate), 10 ga. high tensile (upper tailgate)
Hydraulic System
Ejector: Single-stage, 4.5" bore
Tailgate: (2) 3.5" bore, 2" rod, 20" stroke
Slide: (2) 3.5" bore, 2" rod, 19" stroke
Packer: (2) 3.5" bore, 2" rod, 19" stroke
Valves: Ball shutoff, sectional spool for controls
Operating Pressure: 2,400 PSI (max 2,700 PSI)
Hydraulic Flow: 21 GPM
Reservoir: 30 gal
Performance
Packing Cycle: 15–17 sec
Reload Time: 3 sec
Compaction Rate: 700–800 lbs/yd³
RL10
Specifications
Capacity: 10 yd³
Hopper Capacity: 1 yd³
Body Weight (shell only): 3,391 lbs
Body Weight (complete unit): 8,120 lbs
Hopper Inside Width: 66.3 in
Body Construction
Sidewalls (curved shell): 10 ga. high tensile steel
Flat floor (single sheet): 7 ga. high tensile steel
Roof (curved shell): 10 ga. high tensile steel
Ejector panel face: 10 ga. high tensile steel
Hopper: 3/16" 100 ksi T-1 (optional 1/4" T-1)
Packer panel face: 3/16" T-1 steel
Slide panel face: 3/16" high tensile steel
Hopper sides: 3/16" T-1 (lower tailgate), 10 ga. high tensile (upper tailgate)
Hydraulic System
Ejector: Single-stage, 4.5" bore
Tailgate: (2) 3.5" bore, 2" rod, 20" stroke
Slide: (2) 3.5" bore, 2" rod, 19" stroke
Packer: (2) 3.5" bore, 2" rod, 19" stroke
Valves: Ball shutoff, sectional spool for controls
Operating Pressure: 2,400 PSI (max 2,700 PSI)
Hydraulic Flow: 21 GPM
Reservoir: 30 gal
Performance
Packing Cycle: 15–17 sec
Reload Time: 3 sec
Compaction Rate: 700–800 lbs/yd³
RL10
Specifications
Capacity: 10 yd³
Hopper Capacity: 1 yd³
Body Weight (shell only): 3,391 lbs
Body Weight (complete unit): 8,120 lbs
Hopper Inside Width: 66.3 in
Body Construction
Sidewalls (curved shell): 10 ga. high tensile steel
Flat floor (single sheet): 7 ga. high tensile steel
Roof (curved shell): 10 ga. high tensile steel
Ejector panel face: 10 ga. high tensile steel
Hopper: 3/16" 100 ksi T-1 (optional 1/4" T-1)
Packer panel face: 3/16" T-1 steel
Slide panel face: 3/16" high tensile steel
Hopper sides: 3/16" T-1 (lower tailgate), 10 ga. high tensile (upper tailgate)
Hydraulic System
Ejector: Single-stage, 4.5" bore
Tailgate: (2) 3.5" bore, 2" rod, 20" stroke
Slide: (2) 3.5" bore, 2" rod, 19" stroke
Packer: (2) 3.5" bore, 2" rod, 19" stroke
Valves: Ball shutoff, sectional spool for controls
Operating Pressure: 2,400 PSI (max 2,700 PSI)
Hydraulic Flow: 21 GPM
Reservoir: 30 gal
Performance
Packing Cycle: 15–17 sec
Reload Time: 3 sec
Compaction Rate: 700–800 lbs/yd³
Video
In-Stock Today!
##
In Stock
Item Title
Brand